How to fix a screen that displays intermittently on 3B Medical Equipment?
If the screen on your 3B Medical Equipment displays intermittently or not at all after turning it on, the operating system may need a reset. Unplug the power cord, wait 20 seconds, and then plug it back in.
What to do if the mask cushion hardens on 3B Medical Equipment?
If the mask cushion (the soft part of the mask) on your 3B Medical Equipment hardens, replace the mask or mask cushion.
General| Therapy Modes | CPAP, Auto CPAP |
|---|---|
| Pressure Range | 4-20 cmH2O |
| EPR (Expiratory Pressure Relief) | Yes |
| Data Storage | SD Card |
| Heated Humidifier | Optional |
| Operating Voltage | 100 – 240 V AC, 50/60 Hz |
| Power Supply | AC |
Describes the purpose and intended use of the CPAP/Auto CPAP device.
Lists critical warnings regarding device usage, MR environments, and electromagnetic equipment.
Lists cautions regarding sale, operator training, and cleaning.
Lists absolute and relative contraindications for CPAP therapy.
Lists common patient-related issues and their potential solutions.
To Next Page
