IGMP Multicast Filtering 31
Enabling IGMP Multicast Learning
You can enable or disable multicast learning and IGMP querying using the
snoopMode command on the Web interface. For more information
about enabling IGMP multicast learning, please refer to the Management
Interface Reference Guide supplied on your Switch CD-ROM.
If IGMP multicast learning is not enabled then IP multicast traffic is always
forwarded, that is, it floods the network.
For information about configuring IGMP functionality on an endstation,
refer to the user documentation supplied with your endstation or the
endstation’s Network Interface Card (NIC).
To Next Page
Loading...
