Configuring Trunking 37
■ All ports in a trunk must be configured in an iden-
tical manner, including communication mode (that
is, speed, duplex mode and flow control).
Creating, Modifying, and Deleting Trunks
Use the Modify/Delete tabe under Trunking to create,
configure or remove ports groups from trunks.
Figure 20 Modify/Delete Screen
■ Trunk Number – Displays the number of the trunk.
■ Name – Allows you to label an interface. (Range:
1-64 characters)
■ Flow Control – Allows automatic or manual selec-
tion of flow control.
■ Speed Duplex – Allows auto-negotiation to be
enabled or disabled. When auto-negotiation is dis-
abled, you can force the settings for speed, duplex
mode and flow control.
Defining Trunk Membership
Use the Membership screen to add ports to a group
membership.
Figure 21 Membership Screen
■ Port – The port number
■ Status – The status refers to the speed and duplex
mode of the trunk members
■ Trunk – ID of trunk
Viewing Trunk Information
To view information on the configuration settings for
the created trunks, click the Summary tab under-
Trunking.
To Next Page
Loading...
