EasyManua.ls Logo

3Com 3C16670 - LinkBuilder FMS II Hub - Bridged Token Ring with LinkBuilder MSH; Configuring the LinkBuilder MSH in a Token Ring Environment

3Com 3C16670 - LinkBuilder FMS II Hub
28 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Solution 2: Managed Token Ring Connectivity
Highlights
The LinkBuilder MSH Token Ring
modules provide an array of Token
Ring physical layer resilience fea-
tures unmatched in the industry.
Phase-Locked Loop (PLL) per-port
retiming, Zero Delay Lockout (ZDL),
and jitter reduction ensure a clean
signal and prevent beaconing nodes.
These features ensure greater relia-
bility across Token Ring networks,
support more devices over greater
distances, and ensure that devices do
not interrupt the network by insert-
ing into the ring at the wrong speed.
This solution exploits the
LinkBuilder MSH hub’s ability to
handle multiple Token Ring paths
running at 4 or 16 Mbps. The addi-
tion of a second RingBuilder
module allows the MAUs to be
divided into two Token Rings. The
Local Token Ring Bridge module
provides fully integrated bridging
between those ringsin this case,
between a 4 Mbps ring and the
16 Mbps imaging system ring.
®
RI/RO to 4 Mbps
Token Ring
path connections
2-Port Bridge
Module
Advanced MAU Modules
16 Mbps Token Ring
for document imaging 
system
4 Mbps Token Ring
RingBuilder
Modules
Token Ring backbone
Configuring the
LinkBuilder MSH
in a Token Ring
Environment
Use the following rules to configure
the LinkBuilder MSH for Token Ring.
The Advanced MAU module
does not count as a station.
The STP or UTP MAU module
counts as one station.
The STP or Fiber RingBuilder
module counts as three stations.
The maximum Level 5 UTP
cable lengths for the Advanced
MAU module are:
400 m lobes, 260 stations (4 Mbps)
200 m lobes, 260 stations (16 Mbps)
The maximum STP cable
lengths for the Advanced MAU
module are:
600 m lobes, 260 stations (4 Mbps)
300 m lobes, 260 stations (16 Mbps)
The maximum STP trunk cable
lengths for the RingBuilder
RI/RO are:
770 meters (4 Mbps)
346 meters (16 Mbps)
The maximum UTP trunk cable
lengths for the RingBuilder
RI/RO, when used in conjunction
with approved media filters, are:
100 meters for Level 3 UTP
150 meters for Level 4 UTP
200 meters for Level 5 UTP
Products
LinkBuilder MSH Chassis with FDDI
Backplane (3C18041)
LinkBuilder MSH 525W Power Supply Unit
(3C18012)
LinkBuilder MSH Fiber RingBuilder
Modules (3C18240)
LinkBuilder MSH Advanced MAU Module
(3C18202)
LinkBuilder MSH 2-Port Token Ring Bridge
Module (3C18620)
LinkBuilder MSH Management Module
(3C18500)
Bridged Token Ring with LinkBuilder MSH
LinkBuilder Hub Configuration Guide 7

Related product manuals