2
INSTALLING YOUR 3COM WIRELESS
7760 ACCESS POINT
This chapter contains the information you need to install and set
up the Wireless 7760AP. It covers the following topics:
Unpacking the device
Decide where to place the AP
Connecting the Access Point
Checking the LED indicators
Attaching an External Antenna
For first time use -Installing Device Manager
Unpacking the
device
Make sure that you have the following items in the box:
CD
PoE Injector
Power cord
Two external 2.4 GHz and 5.3 GHz dual-band antennas
Mounting bracket (attached to the access point)
Wall-mounting hardware:
Locking bar (used for securing a wall- or ceiling-mounted
installation)
Two sheet metal screws
Two thread screws
Two wall anchors
Four adhesive rubber feet (used for a flat-surface installation).
To Next Page
Loading...
