Need help?Do you have a question about the 3Com AP9552 and is the answer not in the manual?
General| Model | AP9552 |
|---|---|
| Device Type | Wireless Access Point |
| Frequency Bands | 2.4 GHz, 5 GHz |
| Power over Ethernet | Yes |
| Antenna Type | Internal |
| Wireless Standard | IEEE 802.11a/b/g |
| Data Link Protocol | IEEE 802.11a, IEEE 802.11b, IEEE 802.11g |
| Ethernet Ports | 1 x 10/100 |
| Encryption Algorithm | WEP, WPA, WPA2 |
| Authentication Method | RADIUS |
| Compliant Standards | IEEE 802.11a, IEEE 802.11b, IEEE 802.11g |
| Operating Temperature | 32 °F to 104 °F (0 °C to 40 °C) |
| Power Supply | Power over Ethernet (PoE) |
Guides users on how to access the web configuration interface for the first time.
Illustrates the steps to configure a wireless network service for client access.
Guides on setting up Wi-Fi Protected Access (WPA) Pre-Shared Key authentication.
Explains how to configure MAC address-based authentication locally on the device.
Guides on configuring 802.1X authentication with a remote RADIUS server for secure access.
To Next Page
