4-1
4 WDS Configuration
WDS Configuration Example
Network requirements
As shown in Figure 4-1:
z AP 1 and AP 2 are connected to different LAN se
The WDS link between AP 1 and AP 2 is formed in 80
gments.
2.11n (2.4GHZ) radio mode.
Figure 4-1 Network diagram for WDS configuration
z
C
untry/Region Code from the navigation tree to enter the page for setting a
onfiguration procedure
1) Select a correct country/region code
Select Advanced > Co
country/region code, as shown in Figure 3-2.
2) Configu
re WDS
from the navigation tree to enter the WDS Setup page, as shown in
Select Wireless Service > WDS
Figure 4-2
.
Figure 4-2 WDS setup page
nd the radio unit to be configured in the list, and click the corresponding
Fi
icon to enter the WDS
Setup page shown in Figure 4-3
.
To Next Page
Loading...
Need help?
General
