3Com 5500-SI - Page 24

3Com Switch 5500 Family
Quick Reference Guide
display transceiver-information interface
Use the display transceiver-information interface command to display information about a specified
optical port, including:
Any view
display trapbuffer
Use the display trapbuffer command to display the status of the trap buffer and the records in the trap
buffer.
Any view
display udp-helper server
Use the display udp-helper server command to view the information of destination Helper server
corresponding to the VLAN interface.
Any view
display udp statistics
Use the display udp statistics command to view UDP traffic statistic information.
Any view
display unit
Using display unit unit-id interface command, you can view all port interfaces for the specified unit.
Any view
display user-interface
Use the display user-interface command to view information on a user interface.
Any view
display users
Use the display users command to view information on the current user interface. Use the display users
all
command to view the information on all user interfaces.
Any view
display version
Use the display version command to view the software version, issue date and the basic hardware
configuration information.
Any view
display vlan
Use the display vlan command to display the ports operating in the manual/automatic mode in the current
voice VLAN.
Any view
display vlan
Use the display vlan command to view related information about specific VLANs, specific types of VLAN
or all VLANs.
Any view
display voice vlan oui
Use the display voice vlan oui command to display the OUI address supported by the current system
and its relative features.
Any view
display voice vlan status
Use the display voice vlan status command to display the relative Voice VLAN features including the
Voice VLAN status, the configuration mode, or the current Voice VLAN port status.
Any view
display vrrp
Use the display vrrp command to display the information about the VRRP state or VRRP statistics.
Any view
display webcache
Use the display webcache command to view the configuration of parameters for Webcache redirection and
whether the webcache is accessible.
Any view
display xrn-fabric
Use the display xrn-fabric command to view the information of the entire fabric, including unit ID, unit
name, operation mode.
Any view