3Com 5500-SI - Page 33

3Com Switch 5500 Family 33
Quick Reference Guide
lacp port-priority
Use the lacp port priority command to configure port priority value.
Ethernet Port view
lacp system-priority
Use the lacp system-priority command to configure system priority value.
System view
language-mode
Use the language-mode command to choose the language of the command line interface.
User view
lcd
Use the lcd command to display local working path of FTP Client.
FTP Client view
level
Use the level command to configure user priority level.
Local User view
line-rate
Use the line-rate command, to limit the total rate of the packets received or delivered by interfaces.
Ethernet Port view
link-aggregation group agg-id description
Use the link-aggregation group agg-id description command to configure descriptor for an
aggregation group.
System view
link-aggregation group agg-id mode
Use the link-aggregation group agg-id mode command to create a manual or static aggregation group.
System view
local-server
Use the local-server command to configure the parameters of local RADIUS server.
System view
local-user
Use the local-user command to add a local user and enter local user view.
System view
local-user password-display mode
Use the local-user password-display-mode command to set the password display mode to be used
when the switch displays the local users.
System view
lock
Use the lock command to lock the current user interface and prevent unauthorized users from accessing it.
User view
logging-host
Use the logging-host command to configure a public logging host on the management device for member
devices.
Cluster view
loopback
Use the loopback command to configure the Ethernet port to perform the loopback test to check if the
Ethernet port works normally.
Ethernet Port view
loopback-detection control enable
Use the loopback-detection control enable command to enable loopback detection and control function
for Trunk ports and Hybrid ports.
Ethernet Port view
loopback-detection enable
Use the loopback-detection enable command to enable the loopback detection function globally or for
a specific port.
System view
Ethernet Port view
loopback-detection interval-time
Use the loopback-detection interval-time command to set the time interval for detecting the external
loopback for a port.
System view