EasyManua.ls Logo

3Com 7754 - Page 22

3Com 7754
80 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
22 CHAPTER 1: SWITCH 7750 COMPONENTS
Figure 16 24-Port 100BASE-FX MMF FE Module
Each 100 Mbps optical port has a green LED, as shown in Figure 17.
Figure 17 Front Panel of the 24-Port 100BASE-FX MMF FE Module
1 Ethernet port
2 Ethernet port LED
Table 27 describes the status of the 24-port 100BASE-FX MMF FE module LEDs.
The 24-port 100BASE-FX MMF FE module requires a 62.5/125 µm multi-mode
optical fiber cable with an MT-RJ connector and a central wavelength of 1300 nm.
Table 28 describes the specifications of the 24-port 100BASE-FX MMF FE module.
Tabl e 27 24-Port 100BASE-FX MMF FE Module LEDs
LED Description
LINK/ACT Green — The port is connected.
Off — The port is not connected.
Green flashing — Data is being transmitted or received.
Tabl e 28 Specifications for the 24-Port 100BASE-FX MMF FE Module
Specification Description
CPU MPC850
BootROM 512 KB
SDRAM 64 MB
Dimensions (L x W) 366.7 x 340 mm (14.5 x 13.4 in)
Maximum power
consumption
55 W
Connector type MT-RJ
Number of ports 24
Port transmission speed 100 Mbps, full-duplex
1
2

Table of Contents

Related product manuals