50 CHAPTER 3: CONFIGURING THE SWITCH 7750
Figure 37 Connection Description Dialog Box
2 Enter the name of the new connection in the Name field and click OK. The dialog
box, shown in
Figure 38 displays. Select the serial port to be used from the
Connect using dropdown menu.
Figure 38 Properties Dialog Box
3 After selecting serial ports, click OK. The port shown in Figure 39 displays and you
can set serial port parameters. Set the following parameters:
■ Baud rate = 9600
■ Databit = 8
■ Parity check = none
■ Stopbit = 1
■ Flow control = none
To Next Page
Loading...
