Need help?Do you have a question about the 3Com Baseline Switch 2928-HPWR Plus and is the answer not in the manual?
General| Model | 3Com Baseline Switch 2928-HPWR Plus |
|---|---|
| Power over Ethernet (PoE) | Yes |
| PoE Budget | 370W |
| Switching Capacity | 56 Gbps |
| Forwarding Rate | 41.7 Mpps |
| Layer | Layer 2 |
| Form Factor | Rack-mountable |
| MAC Address Table Size | 8K |
| Jumbo Frame Support | Yes |
| Manageable | Yes |
| Power Supply | Internal |
| Storage Temperature | -40°C to 70°C (-40°F to 158°F) |
| Operating Humidity | 10% to 90% non-condensing |
| Storage Humidity | 5% to 95% non-condensing |
| Features | VLAN, QoS, IGMP Snooping |
| Operating Temperature | 0°C to 40°C (32°F to 104°F) |
| Ports | 24 10/100/1000BASE-T ports, 4 SFP ports |
Essential safety rules to follow before, during, and after installation to prevent injury or damage.
Step-by-step guide for installing the switch into a 19-inch rack using mounting brackets.
Details on connecting the PGND cable and power cords for proper installation.
Guides on connecting a PC and configuring terminal emulation for initial setup.
Step-by-step guide for transferring files using the XMODEM protocol over the console.
Procedures for recovering lost user passwords or Boot ROM passwords.
Troubleshooting steps for power supply failures with AC, RPS, or combined inputs.
To Next Page