Need help?Do you have a question about the 3Com Baseline Switch 2920-SFP Plus and is the answer not in the manual?
General| Model | 2920-SFP Plus |
|---|---|
| Type | Managed Switch |
| Layer | Layer 2 |
| Jumbo Frames | Up to 9216 bytes |
| Power Supply | Internal |
| Warranty | Limited Lifetime |
| Additional Ports | 4 SFP |
| MAC Address Table Size | 16K entries |
| Spanning Tree Protocol | IEEE 802.1D |
| Quality of Service (QoS) | 8 Queues per port |
| Link Aggregation | IEEE 802.3ad |
| Dimensions (W x D x H) | 440 x 44 mm |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -40°C to 70°C |
| Operating Humidity | 10% to 90% (non-condensing) |
| Management | CLI, SNMP |
| Product Series | Baseline |
| Weight | 2.7 kg (6.0 lbs) |
Lists essential safety rules to prevent device damage and personal injury during installation.
Specifies environmental conditions and physical requirements for the installation location.
Step-by-step guide for securely mounting the switch in a standard equipment rack.
Details the procedure for properly grounding the switch for safety and performance.
Explains how to connect the AC or RPS DC power cord to the switch.
Guides users on how to prepare a PC for configuring the switch via a console connection.
To Next Page