3Com SuperStack 3 Quick Reference Guide

11
protocol ip initializeConfig
Resets IP information to factory defaults.
protocol ip interface modify
Modifies IP interface information.
protocol ip interface summary
Displays summary information on the IP interface.
protocol ip ping
Polls remote devices.
protocol ip route default
Defines the default route in the routing table.
protocol ip route noDefault
Removes the default route from the routing table.
protocol ip route summary
Displays summary information on the routing table.
security device access modify
Modifies access rights.
security device access summary
Displays summary information on access rights.
security device authentication logins*
Displays authentication attempts.
security device authentication statistics*
Displays authentication statistics.
security device authentication summary*
Displays summary information on authentication.
security device authentication systemMode*
Modifies the authentication mode.
security device ssh serverAuth hostKey
Displays the host public key.
security device ssh serverAuth keyGen
Generates a new host key.
security device ssh userAuth authentication
Defines user authentication method.
security device ssh userAuth userkey copy
Copies a user public key.
security device ssh userAuth userkey delete
Deletes a user public key.
security device ssh userAuth userkey detail
Displays a user public key.
security device ssh userAuth userkey download
Downloads a user public key.
security device ssh userAuth userkey summary
Displays summary information on user keys.
security device trustedIPhost add
Adds a Trusted IP Host or subnet.
security device trustedIPhost delete
Removes a Trusted IP Host or subnet.
security device trustedIPhost mode
Enables or disables a Trusted IP Host.
security device trustedIPhost summary
Displays Trusted IP Host information.
security device user create
Creates a user.
security device user delete
Deletes a user.
security device user modify
Modifies a user.
security device user pwdRecover
Enables or disables password recovery.
security device user summary
Displays summary information on users.
security network access detail*
Displays summary information on port users.
security network access portSecurity
Enables or disables DUD and NTK.
security network access secureAddresses add
Add a secure MAC address to a port.
security network access secureAddresses remove
Removes a secure MAC address from a port.
security network access secureAddresses summary
Displays the secure MAC addresses on specified ports..
security network access summary
Displays summary information on port security settings.
security network access systemMode
Enables or disables network security.
security network access systemSummary
Displays summary information on the system security settings.
security radius accounting display*
Displays RADIUS accounting statistics.
Command (Continued) What does the Command do?

3Com SuperStack 3 Specifications

General

Model	SuperStack 3
Category	Switch
Form Factor	Rack-mountable
Ports	24 or 48
Layer	Layer 2
Management	Web-based, SNMP, CLI
Power Supply	Internal
Dimensions	Varies by model
Weight	Varies by model
Operating Temperature	0°C to 40°C (32°F to 104°F)
Operating Humidity	10% to 90% non-condensing
Uplink Ports	Varies by model (e.g., 2 Gigabit ports)