3DS MAX Series User Manual

Page 9 of 10 pages
7, Technical Data
* Around oblique line value separately on behalf of 12V and 24V system's value.
Battery
Param
eters
Panel
Param-
eters
Load
System
Param-
eters
MAX1024-U MAX2024-U
10A 20A
12/24V automatic recognition
35V
Gel, AGM, Liquid, Lithium（default: Gel)
14.0~14.8V/28.0~29.6V@25℃(default:14.5/29.0V)
14.3~15.0V/28.6~30.2V@25℃(default:14.8/29.6V)
13.2~14.0V/26.4V~28.0V@25℃( )default:13.7/27.4V
10.8~11.8V/21.6~23.6V(default: 11.2/22.4V)
15.8/31.3V
-4.17mV/K per cell (Boost, Equalization)，
-3.33mV/K per cell (Float)
10.1~32.0V(default: 14.4V)
9.0~30.0V(default: 10.6V)
25V@12V;50V@24V
3.0~10.0V/6.0~20.0V(default: 8.0/16.0V)
10A 20A
5V, 2A
Always on(Default) , D2D, Light control mode,
142* 80 * 30mm
Common Positive
8AWG(10mm²)
-20 ~ +50℃
-25 ~ +80℃
IP32
4000m
Item
Max Charging Current
System Voltage
Max volt on Bat. terminal
Battery Type
Max volt on PV terminal
Dusk/Dawn detect volt.
Output Current
USB interface
Load mode
Dimensions
Weight
Grounding
Power terminals
Ambient temperature
Storage temperature
Protection degree
Max Altitude
Fast Charging Voltage
Boost Voltage
Equalization Voltage
Float Voltage
Low Volt. Disconnect
Overcharge Protect
Temp. Compensation
Charging target voltage
Low voltage disconnect
Liquid,
Gel and
AGM
Lithium
7.1 Parameter
190g
Solar charge controller MAX series User Manual
＜14.5/29.0V @25℃
(Liquid, AGM)
Time control mode, User-defind Mode

3DS MAX Series Specifications

General

Brand	3DS
Model	MAX Series
Category	Controller
Language	English