Need help?Do you have a question about the 3M 2290 and is the answer not in the manual?
General| Brand | 3M |
|---|---|
| Model | 2290 |
| Category | Test Equipment |
| Language | English |
Describes the 3M Model 701 Test Kit for Static Control Surfaces and its purpose.
Lists all accessories required for operating the Model 701 and available replacement parts.
Instructions for inspecting the instrument for damage and verifying contents upon receipt.
Explains the purpose of each control, connector, and indicator on the Instrument.
Procedure to check the charge level of the Instrument's main battery.
Procedure to check the electrical continuity of the test set-up.
Procedure for measuring the resistance of static control surfaces.
Provides a summary of surface measurements specified by ESD-S4.1 for periodic testing, qualification, and material evaluation.
Details test methods and procedures for static control work surfaces as per EOS/ESD standards.
Measures resistance from installed surface to ESD GROUND (RTS-ESDG).
Measures resistance from surface top to groundable point (RTS-GP).
Measures resistance between points on a surface and to groundable points.
Summarizes floor material measurements specified by ESD-S7.1 for installed or applied flooring.
Details test methods and procedures for static control flooring as per EOS/ESD standards.
Measures resistance from floor surface to a groundable point (RTS-ESDG).
Step-by-step guide for performing resistance-to-ground tests on flooring.
Procedure for measuring resistance between two points on flooring.
Details user-performable maintenance tasks and warranty implications.
Step-by-step instructions for replacing the Instrument's batteries.
Instructions on how to clean the conductive rubber pads on test weights.
Procedure to re-zero the Instrument's pointer if it drifts.
Lists user-replaceable parts and their corresponding part numbers.
Details the resistance ranges for different test functions of the Instrument.
Specifies accuracy for the internal test of the 100V source.
Lists the types of batteries used in the Instrument.
Provides dimensions and weight of the Instrument and test weights.
Advises reading MSDS and product labels for chemical handling.
To Next Page
