Need help?Do you have a question about the 3M Dynatel 955 and is the answer not in the manual?
General| Model | 955 |
|---|---|
| Display | LCD |
| Type | Cable Locator |
| Frequencies | 577 Hz, 33 kHz |
| Power Source | Batteries |
| Operating Temperature | -20°C to 50°C |
| Battery | Alkaline |
Explains Auto Cal functions: battery charging, self-calibration, access, battery type, identification, and custom cable setup.
Details the procedure for evaluating vacant or suspect pairs using DC line tests.
Covers detecting and measuring DC and AC voltages on a pair.
Explains how to measure DC current on the subscriber loop for operation power.
Details measuring resistance between conductors or to ground.
Covers converting resistance values to estimate distance to a fault.
Explains how to measure distance to faults (DTF, STF, DTS) on a cable.
Lists measurement ranges, resolutions, and accuracies for the 955/955M model.
Details measurement specifications for the 945/945M Subscriber Loop Tester.
Provides measurement specifications for the 965/965M Subscriber Loop Analyzer.
To Next Page
