To Next PageTo Next Page
Need help?Do you have a question about the 3M 3M-Matic 800r3 and is the answer not in the manual?
General| Category | Power Tool Accessories |
|---|---|
| Type | Case Sealer |
| Case Sealer | Yes |
| Brand | 3M |
| Model | 800r3 |
Read and understand all safety instructions before operating the equipment.
Recommends ordering spare parts expected to wear through normal use.
Details electrical, pneumatic power, and operating rate specifications.
Defines acceptable tape width and maximum roll diameter.
Outlines box board types, weight, and size capacities for the sealer.
Provides overall physical dimensions of the case sealer.
Offers guidance for initial machine setup and conveyor integration.
Instructions for checking the unit for damage upon arrival.
General guidelines for mounting and installing the taping head assembly.
Procedure to adjust tape leg length for proper application.
Procedure for aligning tape or using narrower tapes.
Review of safeguards and component identification before operation.
Detailed steps for loading and threading tape onto the taping heads.
Describes the process of sealing boxes using the case sealer.
Troubleshooting steps for handling a box jam situation.
Procedures for cleaning dust and debris from taping heads.
Procedure for replacing the applying or buffing rollers.
Instructions for checking and maintaining the drive belts.
Information on the circuit breaker and troubleshooting trips.
Procedure for replacing the taping head knife.
How to adjust the tension of the drive belts.
Instructions for adjusting taping head components, refer to Manual 2.
Solutions for problems like drive belts not conveying or breaking.
Troubleshooting for when the blade does not cut tape properly.
Troubleshooting steps for tape not centering on the box seam.
Schematic diagram illustrating the machine's electrical wiring.
Diagram of the pneumatic system controlling machine functions.
List of suggested spare parts for periodic replacement due to normal wear.
Information on ordering replacement parts and obtaining service.
Illustrations and part lists for various frame assemblies.
Illustrations and part lists for upper and lower taping head assemblies.
Details about the safety and information label kit and its contents.
