•Whereabackowpreventiondeviceisinstalledonawatersystem,adeviceforcontrollingpressureduetothermal
expansion must be installed. Contact a plumbing professional if you are uncertain how to select/install/maintain a
thermal expansion device.
•Whereaboosterpumpisinstalledonawatersystem,youmustmaintainandinspecttheattachedpressureswitch
regularly in accordance with the booster pump manufacturer’s instructions. Contact a plumbing professional if you
are uncertain how to maintain your booster pump system.
•Whereaboosterpumpisinstalledonawatersystem,youmustinstallanappropriatepressurereliefvalve.
Pressure relief valve must be maintained and inspected every 6 months. Contact a plumbing professional if you are
uncertain how select/install/maintain a pressure relief valve.
•Whereaboosterpumpisinstalledonawatersystem,youmustinstallanappropriatepressureregulatingvalveand
regulate water pressure to <80psi. Contact a plumbing professional if you are uncertain how select/install/maintain
a pressure regulating valve.
•Mountlterinsuchapositionastopreventitfrombeingstruckbyotheritemsusedintheareaofinstallation.
•Ensurethatthelocationandfastenerswillsupporttheweightofthesystemwheninstalledandfullofwater.
•Ensurealltubingandttingsaresecureandfreeofleaks.
•Do not install unit if collet is missing. Contact 1-800-222-7880 if collets are missing from any fittings.
•
SHUTOFFFUELORELECTRICPOWERSUPPLYTOWATERHEATERafterwaterisshutoff
.
To reduce the risk of water leakage or flooding, and to ensure optimal filter performance:
•Changethedisposableltercartridgeeverysixmonthsorsoonerifyouobserveanoticeablereductioninwater
owrate.
•Failuretoreplacethedisposableltercartridgeatrecommendedintervalsmayleadtoreducedlterperformance
andcracksinthelterhousing,causingwaterleakageorooding.
•Forquestionsorconcerns,pleasecontactCustomerServiceat1-800-222-7880.
NOTICE
Parts and Materials Included:
1. Filter Cartridge
2. Filter Head Assembly
3. 3/8” Tubing
4. 3/8” x 1/2” Faucet Adapter
5. 3/8” Compression Hex Nut
6 3/8” Ferrule
7. 3/8” Tube Insert
8. #2 Phillips Mounting Screws
Tools Required (not included):
• Drill(Cordlessrecommended)
• Adjustablewrench
• Phillipsheadscrewdriver
• Razorknifeortubecutter
Hot
Cold
3/8" Tubing
Filter
Head
Assembly
#2 Phillips
Mounting
Screws
Filter
Cartridge
3/8"x1/2"
Faucet Adapter
3/8" T
3/8" Compression
Hex Nut
3/8" Ferrule
ube Insert
GETTINGSTARTED
•Failuretofollowinstructionsmayvoidwarranty.
•Allowaminimumof2”(5cm)clearspaceunderltertofacilitatecartridgechange.
•Installwiththeinletandoutletportsaslabeled.Makesurenottoreverseconnections.
IMPORTANT NOTES