Need help?Do you have a question about the 3M EX II 1710SC and is the answer not in the manual?
General| Input Voltage | 24 VDC |
|---|---|
| Number of Outputs | 8 |
| Communication Interface | RS-485 |
| Storage Temperature | -20°C to 70°C |
| Humidity | 5% to 95% (non-condensing) |
| Type | Programmable Logic Controller |
Critical safety instructions and precautions to follow before using the product, including danger and warning notices.
Precautions for handling electrostatic sensitive devices and ESD protection measures for the controllers.
Explains the meaning of the LED indicator on the controller for diagnosing status and potential errors.
Initiates an interactive 2-point calibration process for the touch screen.
Collects raw X/Y coordinates for diagnostics before scaling and filtering.
Requests the controller to check for touch screen hardware failures.
Adjusts communication parameters like parity, data bits, and baud rate.
Resets the controller to factory default operating parameters.
To Next Page
