3M MP220 - Install Battery; Remove Battery

11
3M
™
Mobile Projector MP220
© 2011 3M. All Rights Reserved.
English
Remove Battery
1 Remove the battery cover securing screw using a Phillips-head ("crosshead")
screwdriver.
2 Slide the battery cover off.
3 Lift the battery out.
Install Battery
1 Orient the battery so that its contacts line up with the battery contacts inside
the projector.
2 Place the battery into the battery compartment.
3 Slide the battery cover on.
4 Replace the battery cover securing screw using a Phillips-head ("crosshead")
screwdriver.