3M
™
Micro Professional Projector MPro110
12 © 2008 3M. All Rights Reserved.
Operator’s
Guide
Image Size
Increase or decrease the projector-to-wall distance 305 mm (12 in) to 1800 mm (71 in.) to
project an image ranging from 163 mm to 975 mm (6.4 in. to 38.4 in.) wide.
Projector-To-Wall Distance Image Width
305 mm (12 in) 163 mm (6.4 in)
610 mm (24 in) 235 mm (9.3 in)
914 mm (36 in) 355 mm (14 in)
1219 mm (48 in) 523 mm (20.6 in)
1524 mm (60 in) 739 mm (29.1 in)
1800 mm (71 in) 975 mm (38.4 in)
Focus Adjustment
Rotate the focus wheel until the image is clear.
Cleaning Projector
Turn off the projector and disconnect power and other cables.1
Use soft cloth to wipe off dust. If the dust is difficult to remove, dampen the cloth with 2
clean water and then wipe the projector clean. Then use a clean cloth to dry the projector.
Important Notes
Do not use cleaning chemicals or solvents to clean the projector. Cleaning chemicals and •
solvents may cause the plastic parts to discolor.
To Next Page
Loading...
Need help?
General
