3M
™
Micro Professional Projector MPro120
10 © 2009 3M. All Rights Reserved.
English
Warning
To reduce the risk associated with hazardous voltage:
s Do not modify this product in any way. Use only 3M approved replacement components.
s Do not attempt to service this projector other than battery replacement. There are
no user serviceable parts other than the battery. Service to be performed only by a
3M-authorized service provider using 3M-approved system components.
s Do not use the wall power supply in a wet environment.
s Do not use with a damaged wall power supply. Replace damaged part prior to use.
To reduce the risk associated with fire and explosion:
s Do not immerse the projector or battery in any liquid or allow either to get wet.
s Use only 3M approved power supply and Li-Ion polymer battery provided.
s Do not disassemble or short circuit the battery.
s Do not dispose of the battery by incineration or fire.
s Do not operate this projector in any environment above 35°C (95°F).
s Do not expose the projector or battery to direct sunlight in a closed space such as
avehicle.
s Do not carry the battery in pockets, purses or handbags where it may contact
metal objects.
s Do not place battery in contact with metal objects
s Do not expose or store battery in direct sunlight, or excessive heat (>60 C or 140 F)
moist or caustic environments.
To reduce the risks associated with driver distraction in a moving motor vehicle:
s Do not use this projector in a moving motor vehicle.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
