3M Peltor DECT-Com II - Approvals

16
17
6. ACCESSORIES AND SPARE PARTS
PleasecontactyourAuthorized Peltor DECT-Com II Dealer*
)
DC2031 Battery lid for use with 3xAA standard batteries in main unit.
DC2032 Battery carrier for 6xAA auxiliary batteries (excl. batteries).
DC2033 Rechargeable NiMH-accumulator (2100 mAh)
DC2035 Screw for battery lid DC2031
DC2036 Screw for battery carrier DC2032
DC2041 Antenna, general, 1.8 ─ 1.9 GHz for main unit
DC2046 Antenna, omni directional with magnetic foot
DC2048 Antenna ring kit, one of each colour; red, green and black
DC2061 Mains adapter for charger/holder etc., common for EU, UK and US
DC2064 DECT-Com II Charger/holder, 9-15 V DC, IP42 (incl. mains adapter DC2061)
DC2068 Power Supply/holder, 9-33 V DC, IP67 (incl. mains adapter DC2061)
DC2071 Attachment clip, fully rotary for attaching the main units to clothes etc.
DC2072 Cable for Ground Mechanic
DC2078 Connector sealing plug
DC2-5001 Adapter cable for “dynamic standard”
DC2-5005A Adapter cable for telephone 2.2 kOhm
DC2-5010 Adapter cable for ICOM, straight connector
DC2-5030 Adapter cable for Motorola GP340
DC2-5063 Adapter cable for Motorola Mototrbo
WLTX-B Wireless PTT for remote control of the PTT function of an external radio connected to a
DECT-Com II main unit (DC2811, DC2812 or DC2812)
7. APPROVALS
DECLARATION OF CONFORMITY
See last pages in this user’s manual!
APPROVALS
Electrical safety: EN 60 950:2001
EMC: EN 301 489-01:2000
EN 301 489-06:2000
FCC part 15, Subpart D; RSS-213
DECT/radio: EN 301 406-V1.4.1 2001
SAR EN63211:2008
FCC OET Bulletin 65, Supplement C, Edition 01-01