3M Scott Pak-Tracker User Manual

Page 1 of 24 P/N 595278-01 Rev B 2/18
USER INSTRUCTIONS
SCOTT PAK-TRACKER LOCATOR SYSTEM
© 2018 Scott Safety. SCOTT, the SCOTT SAFETY Logo, are marks and/or registered marks. All other trademarks are the property of
their respective owners. Unauthorized use is strictly prohibited.
RED COVERS ON
SENSOR MODULE
PAK-ALERT EQUIPPED WITH THE PAK-TRACKER LOCATOR SYSTEM
INSTALLED ON A SCOTT SAFETY AIR-PAK X3 PRO SCBA
HAND HELD RECEIVER

3M Scott Pak-Tracker Specifications

General

Brand	3M
Model	Scott Pak-Tracker
Category	GPS
Language	English

Summary

Using the Scott Pak-Tracker Locator System

Use as Part of an Accountability System

Using the system as a component of overall personnel tracking for incident management.

Restricted Use in Certain Locations

Principles of Operation

Explains the two-part electronic system and how signals are received and interpreted.

Basic Operation of the Pak-Tracker Locator System

Initiating a Search

Step-by-step guide on how to initiate a search using the system's directional indicators.

Regular Operational Inspection Procedures

Hand Held Receiver Inspection

Procedures for visually inspecting the handheld receiver for damage and functionality.

Pak-Alert Distress Alarm Inspection

System Operation Inspection

Detecting and Avoiding Radio Frequency Interference

Guidelines for Pak-Tracker Transmitters

Battery Charging, Installation, and Replacement

Battery Charging for the Hand Held Receiver

Instructions on how to charge the rechargeable battery pack for the handheld receiver.

Battery Installation for the Hand Held Receiver

Steps to properly install the battery pack into the handheld receiver unit.

Battery Replacement for the Pak-Alert Distress Alarm

Maintenance of the System

Post-Cleaning Inspection

Performance Parameters

Sensitivity Distance

Battery Life - Hand Held Receiver