Need help?Do you have a question about the 3M TL1302 and is the answer not in the manual?
Indicates the laminator is warm and ready for use.
Settings for different item thicknesses: 3 mil for lighter, 5 mil for thicker items.
On/Off button glows red when activated; heat setting buttons also indicate status.
Outlet for laminated object and input slot for feeding items.
Jam release lever and ABS plastic body for handling and operation.
Indicates the laminator is warm and ready for use.
Settings for different item thicknesses: 3 mil for lighter, 5 mil for thicker items.
On/Off button glows red when activated; heat setting buttons also indicate status.
Outlet for laminated object and input slot for feeding items.
Jam release lever and ABS plastic body for handling and operation.
To Next Page
General
