3M V-100 User Manual

V-Series Air Control Valves - Maintenance
© 3M June 2006. All rights reserved.
g. Install the retaining ring with the lock ring removal tool.
h. Place the muffler tube assembly onto the valve assembly and re-
insert the retainer.
2. To replace the o-rings on the control knob:
a. Mount the air regulating valve in a vise, gently gripping the
adjustment knob.
b. Remove the nut on the valve body with a wrench.
c. Lift the valve body off of the adjustment knob stem.
d. Remove the o-rings from the knob stem with a small pliers.
e. Place the new o-rings onto the knob stem with a small pliers.
f. Lower the valve body down over the adjustment knob stem.
g. Re-install the nut with a wrench.
3M™ Low Pressure Connector Assembly V-400
1. The W-3036 is also the spare parts kit for the 3M™ Low Pressure
Connector Assembly V-400. It can be used to replace the disc muffler and
screen. To replace the disc muffler and screen:
a. Remove the retainer with a small pliers.
b. Lift the muffler tube assembly away from the valve assembly.
c. Using a lock ring removal tool remove the retaining ring.
d. Turn the valve assembly over to remove the metal screen and foam
discs.
e. Insert two new foam discs into the valve assembly.
f. Place the new metal screen on top of the foam discs.
g. Install the retaining ring with the lock ring removal tool.
h. Place the muffler tube assembly onto the valve assembly and re-
insert the retainer.

3M V-100 Specifications

General

Brand	3M
Model	V-100
Category	Control Unit
Language	English