3M WX36 - Activate Monitoring Scheduled Events; Stop Monitoring Scheduled Events; Polling Interval Period


73
3.20 Activate monitoring scheduled events
Select [Schedule]  [Start]. You can also activate monitoring events by clicking the schedule start icon on the
toolbar. You cannot add, delete or edit an event during while the event monitoring process is active. Please see
the chapter 5 for the details.
3.21 Stop monitoring scheduled events
Select [Schedule]  [Stop]. You can also stop the monitoring events by clicking [schedule stop] icon on the
toolbar. Please see the chapter 5 for the details.
3.22 Polling Interval Period
Select [Option]  [Status Check Interval], enter the polling interval time in
seconds.
The polling interval time must be within the range from 10 to 3600 seconds.
© 3M 2012. All Rights Reserved.