3M X36 User Manual

Important Notice
All statements, technical information, and recommendations related to 3M’s
products are based on information believed to be reliable, but the accuracy or
completeness is not guaranteed. Before using this product, you must evaluate it
and determine if it is suitable for your intended application. You assume all risks
and liability associated with such use. Any statements related to the product
which are not contained in 3M’s current publications, or any contrary statements
contained on your purchase order shall have no force or effect unless expressly
DJUHHGXSRQLQZULWLQJE\DQDXWKRUL]HGRI¿FHURI0
Warranty
3M warrants that when the 3M Product is used according to 3M’s Intended Use
Statement (www.3M.com/meetings), it will perform satisfactorily for the warranted
durability period as stated in the applicable 3M Product Manual in effect at the
time of purchase. The warranties stated in the applicable 3M Product Manuals
are exclusive and are made in place of any and all express or implied warranties
or conditions, including any implied warranty of merchantability or fitness for a
particular purpose, or any industry practice or custom or trade usage.
Digital Projector X31/X36/X46
Operator's Guide
TECHNICAL

3M X36 Specifications

General

Native Resolution	XGA (1024 x 768)
Contrast Ratio	2000:1
Display Technology	3LCD
Zoom Ratio	1.2:1
Inputs	HDMI, VGA, Composite Video, S-Video
Lamp Life	4000 hours (normal mode), 6000 hours (eco mode)

Summary

Product Warranty and Important Notices

Important Product Notices

Key operational and disclaimer statements for product usage.

Computer Signal Settings

Initial Signal Timing Parameters

Details on timing parameters for various computer signal resolutions.

Projector Connectivity and Ports

D-Sub 15-pin Computer Input/Output

Details for COMPUTER IN1, COMPUTER IN2, and MONITOR OUT ports.

Analog Video and Component Inputs

Connection specifications for Component, S-Video, and Video inputs.

Digital and Audio Interface Ports

Information on HDMI connection and audio input/output ports.

Data and Network Interface Ports

Details for USB, LAN, and serial control port connections.

RS-232C Serial Communication

RS-232C Physical Connection

Instructions for physically connecting the projector via RS-232C.

RS-232C Communication Configuration

Configuration parameters for RS-232C communication.

RS-232C Command Feedback

Understanding projector feedback and error messages via RS-232C.

Networked Command Control

Network Control Connection Procedure

Steps to connect the projector for network-based command control.

Network Port Configuration for Control

Configuring TCP ports for network command control.

Network Command Control Settings

Details on command formats and authentication for network control.

Network Bridge Communication Features

Network Bridge Setup and Connection

Setting up the projector for network bridge operation.

Network Bridge Configuration Parameters

Configuring communication parameters for the network bridge.

PJLink Control Protocol

PJLink Command Reference

List of commands, control descriptions, and parameters for PJLink.