3M X90 - Page 67


67
[IMAGE] Tab
Function General Description
Aspect Switches the mode for aspect ratio.
CL72X / CL73X / NE7 / PL93X / X31i / X36i / X46i
Normal / 4:3 / 16:9 / 16:10 / 14:9
CL73W / WX36i
Normal / 4:3 / 16:9 / 16:10 / 14:9 / Native
Over Scan Adjusts the over-scan ratio.
[-]: Decrease the over scan value.
[+]: Increase the over scan value.
Position Adjusts the display position.
[
]: Increase the vertical position value.
[
]: Decrease the vertical position value.
[
]: Increase the horizontal position value.
[
]: Decrease the horizontal position value.
H Phase Adjusts the horizontal phase to eliminate flicker.
[-]: Decrease the horizontal phase value.
[+]: Increase the horizontal phase value.
H Size Adjusts the horizontal size.
[-]: Decrease the horizontal size value.
[+]: Increase the horizontal size value.
Auto Adjust [Execute]: Performs the automatic adjustment feature.
Reset Initialize the selected function.
Over Scan / V Position / H Position / H Size
[Execute]: After the confirmation message, the selected function will be initialized.
[INPUT] Tab
Function General Description
Progressive Switches the progress mode.
TV / Film / Off
Video NR Switches the noise reduction mode.
High / Mid / Low
Color Space Switches the mode for color space.
Auto / RGB / SMPTE240 / REC709 / REC601
Video Format - S-Video Switches the mode for video format of the S-VIDEO port.
Auto / NTSC / PAL / SECAM / NTSC4.43 / M-PAL / N-PAL
Video Format - Video Switches the mode for video format of the VIDEO port.
Auto / NTSC / PAL / SECAM / NTSC4.43 / M-PAL / N-PAL
HDMI Format Switches the video format for an input from the HDMI port.
Auto / Video / Computer
HDMI Range Changes the digital range for an input from the HDMI port.
Auto / Normal / Enhanced
Computer in - Computer in1 Selects the computer input signal type of the COMPUTER IN1 port.
Auto / Sync On G Off
Computer in - Computer in2 Selects the computer input signal type of the COMPUTER IN2 port.
Auto / Sync On G Off
Frame Lock - Computer in1 Selects the frame lock function on/off of the COMPUTER IN1 port.
On / Off
Frame Lock - Computer in2 Selects the frame lock function on/off of the COMPUTER IN2 port.
On / Off
Frame Lock - HDMI Selects the frame lock function on/off of the HDMI port.
On / Off
© 3M 2012. All Rights Reserved.