74
3.23 Mail Setting
A notification mail will be sent when any error or selected condition occurs. Select [Option] [Mail Settings] to
open the mail settings dialogue.
(1) Mail Settings
Mail Settings dialog is as follows.
Send Mail --- Enable / Disable send mail function.
SMTP Server --- Enter the SMTP Server.
From Address --- Enter the sender’s mail address.
Send Address --- Enter the receiver’s mail addresses up to 10 addresses.
[Add]: Add a receiver’s mail address.
[Delete]: Delete a receiver’s mail address.
[Edit]: Edit receiver’s mail address.
Subject --- Enter the subject.
Mail Text --- Mail Text Setting screen appears to set the mail message.
Attach File --- Enter the file name of attached file (optional).
[Browse]
:
File dialogue appears.
Mail Send Test --- Send a test mail.
(2) Mail Address Settings
Mail Address Setting dialogue is as follows.
Mail Address --- Enter the mail address to be sent, up to
256 characters.
[TO][CC][BCC]: Select TO / CC / BCC.
Notification --- Chose the Error / Alarm to send the mail.
[Select All]: Turn all the check box ON.
[Release All]: Turn all the check box OFF.
To Next Page
Loading...
