13
•
While in Single Image mode, the LCD
Screen will display:
∙
number of images taken
(top centre le);
∙
number of images remaining
(top centre right); and
∙
the baery level indicator
(boom le).
BURST MODE
To take a burst photo, make sure the
camera is in Burst mode
which
should be displayed on the LCD Screen.
If not, short press the Power/Mode
Buon
repeatedly until appears.
TO TAKE A BURST PHOTO
•
Press the Shuer/Select Buon. The
camera will make a short beep then
emit the camera shuer sound. In
Burst mode, your camera takes 3
photos in 1.5 seconds.
•
While in Burst mode, the LCD Screen
will display:
∙
number of images taken
(top centre le);
∙
number of images remaining
(top centre right); and
∙
the baery level indicator
(boom le).
LCD Screen in ‘Single Image’
photo mode
LCD Screen on ‘Burst’ Mode
1