Need help?Do you have a question about the 4BARCODE Technology 4B-2044A Series and is the answer not in the manual?
General| Brand | 4BARCODE Technology |
|---|---|
| Model | 4B-2044A Series |
| Category | Barcode Reader |
| Language | English |
Covers unpacking, inspection, and equipment checklist for the printer.
Details of the printer's front view, including controls and openings.
Details of the printer's rear view, identifying various interface ports.
Instructions for placing the printer, connecting cables, and plugging in the power.
Step-by-step guide on how to load label rolls into the printer.
Instructions for installing the optional peel-off module assembly.
Steps for loading labels when the optional peel-off module is installed.
Guide on how to install and use the external label roll mount.
Instructions on how to launch and begin using the diagnostic software.
Details of printer functions available through the diagnostic tool, including calibration and setup.
Configure Ethernet settings using a USB connection to the printer.
Configure Ethernet settings using an RS-232 serial connection to the printer.
Configure Ethernet settings by directly connecting the printer to the LAN.
Procedure for calibrating the gap or black mark sensor for accurate label detection.
Procedure for calibrating sensors, performing self-test, and entering dump mode.
How to clear DRAM and restore printer settings to their factory defaults.
Procedure to interrupt the AUTO.BAS program execution upon printer startup.
Methods and tools for cleaning the print head, platen roller, and exterior parts.
Common problems identified by LED status and their corresponding recovery procedures.
Troubleshooting common issues related to print quality, such as not printing or paper jams.
Description of LED colors and their meanings during printer operation.
Explanation of how to use the printer's button for various functions like feeding or pausing.
To Next Page
