Touch joystick
Speed gear
Gravity induction
Lens inversion
Figure 8
Figure 10
Lens switching
Headless mode
OnfOff
Figure 9
Gesture photo
3D stereo
Orbit flight
360° roll
Japanese hand (The
throttle of Japanese
hand is on the right)
Picture quality-
switching
16.3 Horizontal calibration operation:
APP
Application operation: click the "correction" icon in the app interface. The LED light on
the aircraft flash and the calibration of the LED light on the
aircraft is completed.
A\ Note: The calibration must be
'completed only when the aircraft is placed on a
horizontal plane.
15. APP control interface function introduction:
16. Pre-flight preparation instructions (using APP operation):
Emergency stop
Flight status
More features
Return
Takeoff
I
landing
Calibration
Fine adjustment
WIFI signal
Aircraft battery power
Settings
Photo / Video
-
Shutter
Media library
16.1 Turn on the power of the aircraft and
place it on the horizontal plane. At this
time, the aircraft placed on the
horizontal plane will automatically
enter the code-matching state, and the
front white light and the red light of
fuselage will flash,
Z1 Note: Set the aircraft in a correct direction, and the nose shall face forward. It must be
placed on the horizontal plane.
16.2 Turn on the WiFi function in the mobile device, select "4DRC_4K_
—
*****" (Figure 8)
Music
in the WiFi list, and turn on APP after it is connected successful. Click on more
Zoom
functions (Figure 9), turn on the touch rocker and the aircraft lights will turn on
normally, indicating successful frequency matching (Figure 10).
Filter
Figure 11
To Next Page
Loading...