Quick Installation Guide
EAP210 or OWL530 Enterprise Access Point ENGLISH
Copyright © 4IPNET, INC. All rights reserved.
iii
Professional installation instruction
1. Installation personal
4ipnet OWL530 is designed for specific application and needs to be installed by a qualified
personal who has RF and related rule knowledge. The general user shall not attempt to install or
change the setting.
2. Installation location
4ipnet OWL530 shall be installed at a location where the radiating antenna can be kept 20 cm
from nearby person in normal operation condition to meet regulatory RF exposure requirement.
3. External antenna
Use only the antennas which have been approved by the applicant. The non-approved antenna(s)
may produce unwanted spurious or excessive RF transmitting power which may lead to the
violation of VZ9130002 limit and is prohibited.
4. Installation procedure
Please refer to user’s manual for the detail.
5. Warning
Please carefully select the installation position and make sure that the final output power does not
exceed the limit set force in relevant rules. The violation of the rule could lead to serious federal
penalty.
To Next Page
Loading...
