Need help?Do you have a question about the 4IPNET EAP220 and is the answer not in the manual?
General| Wireless Standards | IEEE 802.11 a/b/g/n/ac |
|---|---|
| Frequency Bands | 2.4 GHz and 5 GHz |
| Power over Ethernet (PoE) | 802.3af PoE |
| Antenna Type | Internal antennas |
| Mounting Options | Ceiling, Wall |
| Operating Modes | Access Point, WDS |
| Security | WPA/WPA2 |
| Management | Web-based management, SNMP |
| Ethernet Ports | 2 x 10/100/1000 Mbps |
Details FCC rules, operation conditions, and measures to correct radio interference.
Specifies compliance with FCC radiation exposure limits and required installation distance.
Lists R&TTE Directive standards for CE conformity and declaration validity.
Outlines European standards for transmit power, frequency, and regional usage limitations.
Presents regulations from Taiwan's NCC for low-power radio frequency devices.
Introduces the 4ipnet EAP220 Access Point and its advanced features.
Explains that this guide provides initial setup instructions and reference materials.
Details the EAP220's front panel components and visual indicators.
Explains the function of Power, Status, WES, and Wireless LEDs on the front panel.
Describes the function of reset, WES, console, LAN, and uplink ports on the rear.
Mentions the Kensington slot feature on the right side panel.
Guides on optimal placement and connecting the EAP220 to the network via Ethernet.
Details powering the device using a DC adapter or Power over Ethernet (PoE).
Explains how to access the EAP220 web interface using its default IP and credentials.
Shows the System Overview page with Radio and AP status details.
Provides instructions on how to log out from the web management interface.
Reminds users to revert PC IP settings and back up configurations.
Suggests consulting the User's Manual for more detailed configuration and information.
To Next Page
