Do you have a question about the 4IPNET OWL300 and is the answer not in the manual?
Brand | 4IPNET |
---|---|
Model | OWL300 |
Category | Wireless Access Point |
Language | English |
Guide to access the Web Management Interface (WMI) for the first time.
Displays current system status including hardware and network information.
Procedure to change the administrator password for enhanced security.
Configure static or DHCP IP settings for the AP's network interface.
Details on enabling and configuring the initial SSID for wireless access.
Explanation and configuration of Virtual Access Points for multiple SSIDs.
Global wireless settings for RF Card A (2.4GHz) and RF Card B (5GHz).
Configure static or DHCP IP settings for the AP's network interface.
Configure DHCP server settings for NAT mode VAPs, including IP pool.
Configure management services like VLAN, SNMP, Syslog, and IP lists.
Setup for managing APs via controller using a complete CAPWAP tunnel.
Setup for managing APs via controller using a split CAPWAP tunnel.
Manage firewall rules, including enabling, dropping, and passing traffic.
Secure the Web Management Interface by changing the administrator password.
Reset the system to defaults or upgrade firmware via WMI or TFTP.
Detailed description of EAP737 hardware components and ports.
Detailed description of OWL300 hardware components and ports.