Need help?Do you have a question about the 4IPNET EAP757 V1.00 and is the answer not in the manual?
General| Model | EAP757 |
|---|---|
| Category | Wireless Access Point |
| Ethernet Ports | 1 x 10/100/1000 Mbps |
| Operating Temperature | 0°C to 40°C |
| Operating Humidity | 10% to 90% Non-condensing |
| Wireless Standards | IEEE 802.11a/b/g/n/ac |
| Frequency Band | 2.4 GHz, 5 GHz |
| Maximum Data Rate | Up to 300 Mbps (2.4GHz) + 867 Mbps (5GHz) |
| Power over Ethernet | 802.3af |
| Operating Modes | Access Point, WDS |
| Security | WEP, WPA |
| Mounting Options | Ceiling, Wall |
Lists all items included in the package with quantities.
Details and labels of the physical ports and buttons on the device's rear.
Instructions for placing, connecting to the network, and powering the device.
Guide to accessing and logging into the device's web management interface.
Steps to modify the default administrator password for security.
Settings for band, channel, transmit power, and other general wireless parameters.
Steps to set up Virtual Access Points (VAPs) and their parameters like ESSID and VLAN.
Displays the status and configuration of all Virtual Access Points (VAPs).
Instructions for setting up Wireless Distribution System (WDS) for extended coverage.
To Next Page
