03
Button functions
Press the power button a different number of times to perform different functions.
Dash cam status Operation Function
Turned off Press once Turn on the device
Turned on
Press once Turn the Wi-Fi on/off
Press 4 times in a row Format the memory card
Press 5 times in a row Reset factory settings
Press and hold for about 3 seconds Turn off the device
Press and hold for about 15 seconds Force shutdown the device
Receiving the
connection request
Press once Confirm the connection authorization
Voice control
Dash cam supports voice control. During the operation of the dash cam, the voice commands from the user will
trigger the relevant functions of the dash cam.
If the system language of the dash cam is set to Traditional Chinese, the Mandarin voice commands are
supported. If any other language is set, only the English voice commands are supported.
The voice commands are as follows:
Voice command Function
Take photo Dash cam will take a photo and save it to the album.
Lock the video Dash cam will record an emergency video and store it in the emergency video directory.
Turn on audio Dash cam will record audio as well as videos.
Turn off audio Dash cam will not record audio but only videos.
Note: When the dash cam is connected to the 70mai app, voice control is not supported.
Note: The dash cam can be turned on by pressing the power button only when it is connected to an external power supply.
To Next Page
Loading...
