Product installation
1. Preparation prior to installation
Insert the microSD card into the card slot, followed by
inserting the power cord into the power port.
@ Power
cord
2. Installation
DC/IN
MicroSD
O MicroSD card
AV/IN
70mai
As shown in the figure below, attach the dashcam to the
rearview mirror of the original car. Adjust the position
of the dashcam properly. If the rearview mirror of the
original car is too long, the body may be pulled for ad-
justment to ensure that the camera is not blocked. Use
the fixing straps in the packing box to fix the dashcam.
70mai
3
To Next Page
Loading...
