3. Run the power cord
As shown in the figure below, run the power cord
along the front windshield, A-pillar, and co-pilot
storage compartment to the cigarette lighter. Insert
the car charger into the cigarette lighter receptacle.
Pillar A
Tips:
Please use the crowbar in the packing box to embed the
power cord into the A-pillar adhesive tape.
As the positions of cigarette lighter receptacles vary with
vehicles, the specific routing of power cords depends on
the actual conditions. The preceding figure serves as a
reference on ly•
4. Adjust camera
Start the vehicle or rotate the key to the ACCgear
position to supply power to the cigarette lighter. The
dashcam will be turned on automatically.
The camera supports universal angle adjustment,
with a rotational range of ±40. Please adjust the angle
according to the preview screen to ensure that the
camera is forward-facing.
4
To Next Page
Loading...
