zomai
Startup/shutdown
1. Startup
The dashcam supports the following ways of startup:
' Press and hold the power button for startup.
Connect the cigarette lighter and start the vehicle.
The cigarette lighter will be powered by the vehicle
and the dashcam will be turned on automatically.
' Enable the Parking Surveillance function. The
dashcam will be turned on automatically when any
collision or movement of the vehicle is detected in
Parking Surveillance mode.
If no external power supply is connected and the
built-in battery has a low capacity, the dashcam will
not be started.
2. Shutdown
The dashcam supports the following ways for shut-
down:
Press and hold the power button.
' Connect the cigarette lighter and turn off the
engine. When the power supply from the vehicle to
5
To Next Page
