EN
- Our robots are designed to facilitate the
maintenance of your pool. However, they are not
intended to clean a pool full of algae and leaves
(ex: end of winter period).
In this case you must: use the leaf skimmer,
clean the filter and put back on the filter and
the pump.
- A tile coating leads to faster wear of the brushes
and belts. Please check these regularly.
- To remove the cleaner from your pool, lift the
cable slowly and gently until you can grab it by
the handle. Use the handle to fully pull out the
cleaner
- In order to access the filter basket, place hands as
shown in picture. Push with thumbs to unlock lid.
QUICK FACTS
03 PACKAGE CONTENTS
Page 5
1. Robotic pool cleaner
2. Power transformer control box
3. Long cord
4. No-twist Floating device with rotary coupling
5. Sample of fine filter
03 Package contents
To Next Page
Loading...