Need help?Do you have a question about the a/d/s/ PH30.2 and is the answer not in the manual?
Guidance on how to best use this manual for installation and setup.
Detailed list of the advanced features and technological advancements of the PowerPlate™ amplifier.
Important safety advice regarding high volume listening and potential hearing damage.
Guidance on selecting appropriate and safe places to install the PowerPlate™ amplifier.
Details on speaker impedance and load requirements for optimal system performance.
Diagrams and guidelines for connecting speakers in stereo and bridged configurations.
Explanation of the digital display used to show crossover frequencies.
Guide to connecting and using the optional AC502 remote level control.
Instructions for fine-tuning the amplifier's crossover settings for optimal sound.
Detailed technical specifications for the amplifier's performance and output.
Technical specifications related to the amplifier's crossover capabilities.
General| Channels | 2 |
|---|---|
| RMS Power at 4 Ohms | 30W x 2 |
| Frequency Response | 20Hz - 20kHz |
| THD at Rated Power | 0.05% |
| Signal to Noise Ratio | 95dB |
| Crossover Frequency | 50Hz - 250Hz |
| Bridged RMS Power at 4 Ohms | 100W x 1 |
To Next Page