EasyManua.ls Logo

A-iPower APW2700A - Maintenance; Engine Maintenance Schedule

A-iPower APW2700A
118 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
FOR TECHNICAL QUESTIONS, PLEASE CALL 1-855-888-3598
MAINTENANCE 20
NOTICE: Regular maintenance will improve the performance and extend the life of your
Pressure Washer. Service should be done by a qualified person or technician.
Pressure Washer’s warranty does not cover items that have been subjected to operator
abuse or negligence. Only by maintaining Pressure Washer in accordance with instructions
in this manual will the full value of the warranty be honored. Some adjustments will need to
be made periodically to properly maintain the Pressure Washer. All service and adjustments
should be made at least one time each season. It is important that the maintenance chart
below be followed.
Many maintenance procedures, including any not detailed in this manual, will need to be
performed by a qualified technician for safety. If you have any doubts about your ability to
safely service the equipment or engine, have a qualified technician service the equipment
instead.
Engine Maintenance Schedule
NOTICE: This maintenance schedule is intended solely as a general guide. If
performance decreases or if equipment operates unusually, check systems
immediately. The maintenance needs of each piece of equipment will differ
depending on factors such as duty cycle, temperature, air quality, fuel quality,
and other factors.
NOTICE: The following procedures are in addition to the regular checks and
maintenance explained as part of the regular operation of the engine and
equipment.
ENGINE MAINTENANCE CHART
ITEM TASK EACH USE 3 MONTHS 6 MONTHS 1 YEAR
ENGINE OIL
Check Level X
Replace X*
AIR FILTER
Check X
Clean X
Replace X*
SPARK PLUG
Clean, adjust X**
Replace X* **
SPARK
ARRESTER
Clean X
* Recommended to be performed more frequently if used in a dusty environment.
** Set gap to 0.6 - 0.7mm

Table of Contents

Related product manuals