NEED HELP? GIVE US A CALL 855.424.9892
The Bypass Valve can isolate the appliance should appliance malfunction or leak. It can also
permit the use of untreated water for watering plants, shrubs, or lawns.
The Bypass Valve is attached to the main control valve. To engage Bypass Valve, remove the
cabinet cover and locate the knob. Turn knob to the left until it hits the stop. The appliance
will be bypassed and all water to the home is raw, untreated water. To prevent untreated
water from entering the home, water should not be used inside the home when the
appliance is in Bypass Mode. Ensure that the appliance is returned to Service Mode when
the appliance is repaired or the use of untreated water is complete by turning the black
knob to the right until it hits the stop.
Service Position
Bypass Position
11
BYPASS VALVE OVERVIEW
Bypass Valve
To Next Page
Loading...
Need help?
General
