NEED HELP? GIVE US A CALL 855.424.9892
SYSTEM CONFIGURATION
5
ELECTRICAL SHOCK HAZARD
Prior to installation on metallic plumbing, securely install two grounding clamps and
a #4 copper wire per installation instructions. Failure to follow these instructions can
result in death or electric shock.
Ground Wire and Clamps
(Copper Pipe Only)
Hard Water To
Outside Faucets
Shut Off
Valve
Inlet Outlet
Hot Soft
Water
Water
Heater
Cold Soft
Water
Electrical
Outlet
Drain and
Overow Lines
NOTICE: Failure to comply with these specications may decrease the effectiveness of the backwash and
cause control valve malfunction. The water softener, like any other appliance, requires correct installation
and setting for optimum performance.
WARNING
To Next Page
Loading...
