Need help?Do you have a question about the A.O. Smith FPSH 50 and is the answer not in the manual?
General| Capacity | 50 Gallons |
|---|---|
| Power Source | Electric |
| Pressure Rating | 150 PSI |
| Thermostat | Adjustable |
| Tank Material | Glass-Lined |
| Warranty (Tank) | 6 Years |
| Warranty (Parts) | 6 Years |
| Heating Element | Dual |
| Warranty | 6 years |
| Capacity (liters) | 189 liters |
| Voltage | 240V |
Lists residential water heater models covered in this manual.
Lists commercial water heater models covered in this manual.
Explains the integrated functions of the SmartValve control unit.
Describes the ignition module's sequence, timing, and retry logic.
Covers the thermostat settings and high-limit (ECO) function of the SmartValve.
Details gas valve connections, pressure requirements, and natural/propane differences.
Details for FPST, FPSH, FPCR, FPD models including description, blower, and burner.
Details for FPSE/FPSH 75/BTF 75 models including description, blower, and burner.
Details for BTI 80/100 models including description, blower, and burner.
Outlines the step-by-step operational sequence of the SmartValve control.
Provides common troubleshooting steps and solutions for SmartValve issues.
Verifies outlet, ground path, and wiring harness for proper electrical function.
Tests air proving, vent temp limit, blocked exhaust, and inlet switches.
Diagnoses igniter issues and checks manifold gas pressure.
Highlights typical problems encountered during water heater installation.
Addresses frequent problems and maintenance tips for service technicians.
To Next Page