EasyManua.ls Logo

A.O. Smith Z1 - Troubleshooting Indicator Alerts; Buzzer Beeps & Power LED Blinks

A.O. Smith Z1
36 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
18
Buzzer beeps and UV Lamp failure alarm is Switch OFF the water
UV ON LED blinks triggered indicating that purifier and call Customer
continuously. the UV Lamp is open care centre.
and the water supply
has been stopped.
Buzzer beeps and Water level sensor error. Switch OFF the water
tank full LED blinks purifier and call Customer
continuously. care centre.
Buzzer beeps and Inlet solenoid valve alarm Switch OFF the water
tank full +power LED is triggered indicating that purifier and call Customer
blinks continuously. the solenoid valve is short. care centre.
Buzzer beeps for 10 times Low pressure alarm is Switch OFF the water
and power LED blinks triggered indicating that purifier and call Customer
continuously. the system input water care centre.
pressure is not in the
required range.
UV change LED glows. UV change indicator glows Call Customer care centre
when 10% life is remaining for UV lamp replacement.
indicating that it is time to
replace UV lamp.

Related product manuals