3
UNPACKING / INSPECTION
The softener is shipped in one master carton. The softeners are completely assembled
at the factory, except as required at installation. Be sure to check the entire softener for
any shipping damage or parts loss. Also note damage to the shipping cartons. Contact
the transportation company for all damage and loss claims. The manufacturer is not
responsible for damages in transit. Small parts, needed to install the softener, are in
parts bag. To avoid loss of the small parts, keep them in the parts bag until you are
ready to use them.
TABLE OF CONTENTS
PAGE N°
SAFETY GUIDES 2
SPECIFICATIONS, DIMENSIONS 4
BEFORE STARTING INSTALLATION 5 - 6
TYPICAL INSTALLATION ILLUSTRATION 6
INSTALLATION STEPS 7- 10
PROGRAMMING THE TIMER 11 - 13
SANITIZING PROCEDURES 14
WATER AND WATER CONDITIONING 15 - 16
HOW THE WATER SOFTENER WORKS 16 - 17
GENERAL WATER SOFTENER MAINTENANCE & TROUBLESHOOTING 18 - 20
AUTOMATIC ELECTRONIC DIAGNOSTICS 20
SERVICE CHECKOUT PROCEDURES, WIRING SCHEMATIC 21 - 23
WATER FLOW THROUGH VALVE 24 - 25
REPAIR PARTS 26 - 30
To Next Page
Loading...